[collectd] Unsuported sensor by ipmi plugin

[Cyril Feraudet]

Hi all again,

I've this in my log and no data about ipmi sensor in Collectd :

ipmi plugin: sensor_list_add: Ignore sensor Power Supplies power_supply 
(10.3), because I don't know how to handle its type (0x8, power_supply). 
If you need this sensor, please file a bug report.

It's about the power consumption in watt of a ProLiant DL380 G7 :

# ipmitool sdr
UID Light        | 0 unspecified     | ok
Sys. Health LED  | 0 unspecified     | ok
Power Supply 1   | 95 Watts          | nc
Power Supply 2   | 105 Watts         | nc
Power Supplies   | 0 unspecified     | nc
Fan 1            | 43.12 unspecifi | nc
Fan 2            | 43.12 unspecifi | nc
Fan 3            | 41.55 unspecifi | nc
Fan 4            | 49 unspecified    | nc
Fan 5            | 49 unspecified    | nc
Fan 6            | 13.72 unspecifi | nc
Fans             | 0 unspecified     | nc
Temp 1           | 19 degrees C      | ok
Temp 2           | 40 degrees C      | ok
Temp 3           | 40 degrees C      | ok
Temp 4           | 28 degrees C      | ok
------
Temp 29          | 35 degrees C      | ok
Temp 30          | 58 degrees C      | ok
Memory           | 0 error           | ok
Power Meter      | 226 Watts         | cr    <------------- this one

To make it working I have added this below to ipmi.c, the message in 
logs disappear but no new graph in Collectd.

Do you have an idea ?

--- src/ipmi.c  2012-11-19 16:05:47.000000000 +0100
+++ ../org/src/ipmi.c   2012-11-15 10:56:43.817949208 +0100
@@ -302,10 +302,6 @@
        type = "voltage";
        break;

-    case IPMI_SENSOR_TYPE_POWER_SUPPLY:
-      type = "power";
-      break;
-
      case IPMI_SENSOR_TYPE_CURRENT:
        type = "current";
        break;

Regards,

Cyril