[collectd] Wireshark dissector for collectd network plugin

[Bruno Prémont]

Hi Florian,

Attached is an updated version of the patch that fixes all complaints
of checkAPI.pl (except the non-ascii characters in my name) and
implements bad packet/part marking.

Please play around with it (for especially for notification part), I
expect to submit it to wireshark in one or two hours.

Bruno


On Fri, 02 January 2009 Florian Forster wrote:
> Hi Bruno,
> 
> On Thu, Jan 01, 2009 at 01:39:07PM +0100, Florian Forster wrote:
> > > - I'm not sure the double decoding is right... I have just used
> > > the ieee double support from wireshark - this might not work as
> > > expected on some architectures!
> 
> as mentioned earlier: Decoding of doubles sent by non-x86 hosts
> worked - as expected. So the only thing left to test is wireshark
> running on a non-x86 architecture.
> 
> I've changed your patch a little. Because at [0] I've read that new
> dissectors should be included in the program (rather than putting them
> into a plugin), I've moved the file to epan/dissectors/. I've changed
> the formatting a little, so that the output is now
>   0 values
>   1 value
>   2 values
>   ...
> (something that bugs me ;).
> 
> Regards,
> -octo
> 
> [0] <http://www.wireshark.org/docs/wsdg_html/#ChSrcSend>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: wireshark-1.0.5-collectd-r2.patch
Type: text/x-patch
Size: 33242 bytes
Desc: not available
Url : http://mailman.verplant.org/pipermail/collectd/attachments/20090103/7fa905e0/attachment-0001.bin