[collectd] collection.cgi not displaying load.rrd graph

[Patrick Wong]

Howdy Florian,
   My mistake (stupid entry that shouldn't be there) in
/etc/collectd.conf once removed now I get better result:
 [root at versa10 lics01.versasys.com]# rrdtool fetch load.rrd AVERAGE -s
'now -2 minutes'
timestamp    shortterm         midterm           longterm

1162395720:  1.8000000000e-01  1.3683333333e-01  1.5500000000e-01
1162395780:  1.2566666667e-01  1.2966666667e-01  1.5000000000e-01
1162395840:  6.7333333333e-02  1.1133333333e-01  1.4133333333e-01
1162395900:  nan  nan  nan

The above was run on versa10, which is the collectd in "server" mode,
against rrd 'load' data from lics01 which is in "client" mode.

Collection.cgi still won't display the load graph however.

On lics01 (the client), the following modules was set to run in
/etc/collectd.conf:
Cpu, load, memory, processes, swap, and traffic.
This is pretty much true on all the servers that run collectd as client.

On versa10 (the server) /etc/collectd.conf I also turned on the same
modules as on the client.

Below is the output of rrdtool info you requested:

 [root at versa10 lics01.versasys.com]# rrdtool info
/var/lib/collectd/lics01.versasys.com/load.rrd
filename = "/var/lib/collectd/lics01.versasys.com/load.rrd"
rrd_version = "0001"
step = 10
last_update = 1162396630
ds[shortterm].type = "GAUGE"
ds[shortterm].minimal_heartbeat = 25
ds[shortterm].min = 0.0000000000e+00
ds[shortterm].max = 1.0000000000e+02
ds[shortterm].last_ds = "UNKN"
ds[shortterm].value = 0.0000000000e+00
ds[shortterm].unknown_sec = 0
ds[midterm].type = "GAUGE"
ds[midterm].minimal_heartbeat = 25
ds[midterm].min = 0.0000000000e+00
ds[midterm].max = 1.0000000000e+02
ds[midterm].last_ds = "UNKN"
ds[midterm].value = 0.0000000000e+00
ds[midterm].unknown_sec = 0
ds[longterm].type = "GAUGE"
ds[longterm].minimal_heartbeat = 25
ds[longterm].min = 0.0000000000e+00
ds[longterm].max = 1.0000000000e+02
ds[longterm].last_ds = "UNKN"
ds[longterm].value = 0.0000000000e+00
ds[longterm].unknown_sec = 0
rra[0].cf = "AVERAGE"
rra[0].rows = 1500
rra[0].pdp_per_row = 6
rra[0].xff = 2.0000000000e-01
rra[0].cdp_prep[0].value = 9.0000000000e-02
rra[0].cdp_prep[0].unknown_datapoints = 0
rra[0].cdp_prep[1].value = 1.2000000000e-01
rra[0].cdp_prep[1].unknown_datapoints = 0
rra[0].cdp_prep[2].value = 1.2000000000e-01
rra[0].cdp_prep[2].unknown_datapoints = 0
rra[1].cf = "AVERAGE"
rra[1].rows = 1680
rra[1].pdp_per_row = 180
rra[1].xff = 1.0000000000e-01
rra[1].cdp_prep[0].value = 2.4801000000e+01
rra[1].cdp_prep[0].unknown_datapoints = 0
rra[1].cdp_prep[1].value = 2.4514000000e+01
rra[1].cdp_prep[1].unknown_datapoints = 0
rra[1].cdp_prep[2].value = 2.4627000000e+01
rra[1].cdp_prep[2].unknown_datapoints = 0
rra[2].cf = "AVERAGE"
rra[2].rows = 1520
rra[2].pdp_per_row = 2160
rra[2].xff = 1.0000000000e-01
rra[2].cdp_prep[0].value = 2.6815700000e+02
rra[2].cdp_prep[0].unknown_datapoints = 0
rra[2].cdp_prep[1].value = 2.5082700000e+02
rra[2].cdp_prep[1].unknown_datapoints = 0
rra[2].cdp_prep[2].value = 2.2995000000e+02
rra[2].cdp_prep[2].unknown_datapoints = 0
rra[3].cf = "MIN"
rra[3].rows = 1500
rra[3].pdp_per_row = 6
rra[3].xff = 2.0000000000e-01
rra[3].cdp_prep[0].value = 9.0000000000e-02
rra[3].cdp_prep[0].unknown_datapoints = 0
rra[3].cdp_prep[1].value = 1.2000000000e-01
rra[3].cdp_prep[1].unknown_datapoints = 0
rra[3].cdp_prep[2].value = 1.2000000000e-01
rra[3].cdp_prep[2].unknown_datapoints = 0
rra[4].cf = "MIN"
rra[4].rows = 1680
rra[4].pdp_per_row = 180
rra[4].xff = 1.0000000000e-01
rra[4].cdp_prep[0].value = 2.0000000000e-02
rra[4].cdp_prep[0].unknown_datapoints = 0
rra[4].cdp_prep[1].value = 9.0000000000e-02
rra[4].cdp_prep[1].unknown_datapoints = 0
rra[4].cdp_prep[2].value = 1.2000000000e-01
rra[4].cdp_prep[2].unknown_datapoints = 0
rra[5].cf = "MIN"
rra[5].rows = 1520
rra[5].pdp_per_row = 2160
rra[5].xff = 1.0000000000e-01
rra[5].cdp_prep[0].value = 2.0000000000e-02
rra[5].cdp_prep[0].unknown_datapoints = 0
rra[5].cdp_prep[1].value = 9.0000000000e-02
rra[5].cdp_prep[1].unknown_datapoints = 0
rra[5].cdp_prep[2].value = 1.1000000000e-01
rra[5].cdp_prep[2].unknown_datapoints = 0
rra[6].cf = "MAX"
rra[6].rows = 1500
rra[6].pdp_per_row = 6
rra[6].xff = 2.0000000000e-01
rra[6].cdp_prep[0].value = 9.0000000000e-02
rra[6].cdp_prep[0].unknown_datapoints = 0
rra[6].cdp_prep[1].value = 1.2000000000e-01
rra[6].cdp_prep[1].unknown_datapoints = 0
rra[6].cdp_prep[2].value = 1.2000000000e-01
rra[6].cdp_prep[2].unknown_datapoints = 0
rra[7].cf = "MAX"
rra[7].rows = 1680
rra[7].pdp_per_row = 180
rra[7].xff = 1.0000000000e-01
rra[7].cdp_prep[0].value = 4.5000000000e-01
rra[7].cdp_prep[0].unknown_datapoints = 0
rra[7].cdp_prep[1].value = 2.2800000000e-01
rra[7].cdp_prep[1].unknown_datapoints = 0
rra[7].cdp_prep[2].value = 1.9000000000e-01
rra[7].cdp_prep[2].unknown_datapoints = 0
rra[8].cf = "MAX"
rra[8].rows = 1520
rra[8].pdp_per_row = 2160
rra[8].xff = 1.0000000000e-01
rra[8].cdp_prep[0].value = 6.2000000000e-01
rra[8].cdp_prep[0].unknown_datapoints = 0
rra[8].cdp_prep[1].value = 3.2600000000e-01
rra[8].cdp_prep[1].unknown_datapoints = 0
rra[8].cdp_prep[2].value = 2.1000000000e-01
rra[8].cdp_prep[2].unknown_datapoints = 0


-----Original Message-----
From: Florian Forster [mailto:octo at verplant.org] 
Sent: Wednesday, November 01, 2006 4:03 AM
To: Patrick Wong
Cc: collectd at verplant.org
Subject: Re: [collectd] collection.cgi not displaying load.rrd graph

Hi Patrick,

On Mon, Oct 30, 2006 at 10:35:13AM -0500, Patrick Wong wrote:
> Sorry for the delay response, Florian!

no problem, I'm not the fastest responder myself, these days :/

> The rest of the graphs were displayed correctly except for the LOAD.
> There is a stub broken image there between cpu and memory usage graph
> for what's suppose to be the load's graph.

Okay, I mainly wanted to know if `collection.cgi' finds the RRD-file and
_tries_ to generate a graph. Unknown RRD-files are ignored, so the
(broken) image there is a good thing ;)

> [root at versa10 lics01.versasys.com]# rrdtool fetch load.rrd AVERAGE -s
> 'now -2 minutes'
> timestamp    shortterm         midterm           longterm
> 
> 1162221180:  nan  nan  nan
> 1162221240:  nan  nan  nan
> 1162221300:  nan  nan  nan
> 1162221360:  nan  nan  nan

That's weird: The RRD-file is only created, if values are submitted. Is
your system so busy that the load is higher than 100? In that case try
increading the maximum:
  rrdtool tune <filename> --maximum shortterm:1000
  rrdtool tune <filename> --maximum midterm:1000
  rrdtool tune <filename> --maximum longterm:1000

> Interesting! It seems like no value had been collected! I think the
> collection.cgi script will only generate the graph if there's
something
> to display.

No, that's not the case. If there are no values, an empty graph will be
displayed.

> Attached is the collection.cgi script, which comes with the rpm
> package for redhat es 4.4 which I made no changes.

The script looks alright. Maybe I could ask you one more favor: Could
you send the output of `rrdtool info /path/to/load.rrd'? Thanks ;)

Regards,
-octo
-- 
Florian octo Forster
Hacker in training
GnuPG: 0x91523C3D
http://verplant.org/