[collectd] collectd network protocol architecture dependent?

[Josef Liška]

Hello all,
I've been using collectd as a replacement of mrtg to collect port 
statistics from about 300 switches each 2 minutes.
It works well and eats several times less resources than mrtg did.

Now I am trying to collect data from w1 temperature sensors DS18B20 
connected to openwrt router.
But, rrds generated directly on openwrt are not readable on x86_64, and 
converting using rrdtool dump to xml and then restore back is just not 
practical.

The next thing I tried was to send data over internet using collectd's 
native udp network protocol.
RRD's (and csv files) are generated on server, but values are completly 
broken.

CSV on openwrt(mips):

temperature-pokoj-2009-10-20
1256052837,6.687000

CSV on server(x86_64):
1256052837,85895840939116867079627892876790231980165998278341611721092715221072275612443160256707909917618610202005575696689085565050094707862453602538507158460564974556746806807764370886452802839001656735724612494256561424797284354354332522718963221038891008.000000

Any ideas?

-- 

S pozdravem
Josef Liška

CHL | system care

Telefon: +420.272048055
Fax: +420.272048064
Mobil: +420.776026526 denně 9:00 - 17:30
Jabber: jl at chl.cz
https://www.chl.cz/

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.verplant.org/pipermail/collectd/attachments/20091020/91f60fe6/attachment.htm 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: jl.vcf
Type: text/x-vcard
Size: 433 bytes
Desc: not available
Url : http://mailman.verplant.org/pipermail/collectd/attachments/20091020/91f60fe6/attachment.vcf