[collectd] Sensors and temp reading

[Hans-Cees Speel]

> My sensors output shows
> 
> adm1023-i2c-0-19
> Adapter: SMBus I801 adapter at dcd0
> Board:       +35°C  (low  =  -128°C, high =  +127°C)
> CPU:         +39°C  (low  =  -128°C, high =   +85°C)
> 
> adm1023-i2c-0-18
> Adapter: SMBus I801 adapter at dcd0
> Board:       +38°C  (low  =  -128°C, high =  +127°C)
> CPU:         +41°C  (low  =  -128°C, high =   +85°C)
> 
> But the collectd daemon reports the following,
> 
> type=sensors; inst=adm1023-temp; val=1132088135:35.000
> type=sensors; inst=adm1023-temp; val=1132088135:38.000 
> 
> So in both cases, I am missing the collection of CPU temperatures. Any
> thoughts before I try to dig into it?

No sorry. I don't even code c I am afraid. I just made the rpm's for 
sme anbd a howto, but do not know how collectd works internally.

Hans-Cees



> 
> Thanks
> Filip
> 
> 
> Filip Hanik
> Sr Software Engineer
> La Quinta Corporation 
> http://www.lq.com/
> 
> -- 
> No virus found in this outgoing message.
> Checked by AVG Free Edition.
> Version: 7.1.362 / Virus Database: 267.13.3/173 - Release Date:
> 11/16/2005
> 
> 
> _______________________________________________
> Collectd mailing list
> Collectd at verplant.org
> http://mailman.verplant.org/listinfo/collectd
> 

Hans-cees Speel @ http://www.hanscees.com
Trees @ http://www.bomengids.nl